Differences

This shows you the differences between two versions of the page.

--- central_water_supply_system_touch [2025/11/05 13:58] – created ishakeradmin
+++ central_water_supply_system_touch [2025/11/05 14:07] (current) – [Connection to the central water supply system (Touch)] ishakeradmin
@@ Line 16: / Line 16: @@
   - Unwind the fishing line with the {{ :t-wastesensor1.jpg?linkonly |waste sensor}}. float . The float should hang freely into the waste container, and the sensor should be in {{ :t-wastesensor.jpg?linkonly |lower position}}.
   - Start the machine. When you first start it [[error_1_no_water_touch_usa|Error 1 No Water]] will appear on the screen.
-  - Press the {{ :t-service_mode.jpg?linkonly |SERVICE MODE}} and press the {{ :t-pumpingwaterbutton.png?linkonly |"Pumping water"}} button at the machine display.
+  - Press the {{ :t-service_mode.png?linkonly |SERVICE MODE}} and press the {{ :t-pumpingwaterbutton.png?linkonly |"Pumping water"}} button at the machine display.
   - The machine will begin filling the system. Wait for it to complete. Once the hoses are filled, water will begin flowing through mixer #1 and the hoses into the drain tank.