IShaker Wiki

User Tools

Site Tools

Trace:
central_water_supply_system_touch2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
central_water_supply_system_touch2 [2025/11/25 13:53] – [Connection to the central water supply system (Touch 2)] ishakeradmincentral_water_supply_system_touch2 [2025/11/25 13:53] (current) – [Adjusting the water level] ishakeradmin
Line 31: Line 31:
   - Open the service menu and rinse the mixers by pressing buttons 1-4 on the screen one by one.   - Open the service menu and rinse the mixers by pressing buttons 1-4 on the screen one by one.
   - Press {{ :t-controller_reboot.jpg?linkonly |CONTROLLER REBOOT}}. service button . After the machine restarts, make sure that the No Water error 1 is no longer displayed on the screen.   - Press {{ :t-controller_reboot.jpg?linkonly |CONTROLLER REBOOT}}. service button . After the machine restarts, make sure that the No Water error 1 is no longer displayed on the screen.
-  - After setting the water level, check the water output in the service menu {{ :t-conversionfactorscreen.png?linkonly |ConvertionFactor}} tab.+  - After setting the water level, check the water output in the service menu {{ :t-conversionfactorscreen.png?linkonly |ConversionFactor}} tab.
  
 The water supply connection setup is complete. The water supply connection setup is complete.
central_water_supply_system_touch2.1764068005.txt.gz · Last modified: 2025/11/25 13:53 by ishakeradmin