Differences

This shows you the differences between two versions of the page.

--- ishaker-s [2025/12/11 15:49] – ishakeradmin
+++ ishaker-s [2025/12/17 15:22] (current) – ishakeradmin
@@ Line 105: / Line 105: @@
   - Open the service menu, set the values for the remaining products according to the filling of the container.
 {{ :pwdrload.png?nolink&600 |}}
+----
+===== Connection of liquid concentrates =====
+Hoses for connecting concentrated drinks are included with the machine. Connect the hoses to the fittings on the back of the machine. Please note that a specific drink number is used for each hose.
+{{ :ms-syrup-hoses-connect.png?nolink&400 |}}
+  - Attach the other end of the hose to the concentrate box using standard connectors. If you use concentrates from a third-party manufacturer, the connector can be removed from the hose for easy connection.
+  - Drinks must be set up before the sales start. Open the door of the vending machine, press and hold the {{ :ms-pumpsyrup.jpg?linkonly |PUMP SYRUP}} button of the pump to which the hose is connected. Pump the hose until the concentrate starts dripping from the hoses of the beverage dispenser window.
+  - Open the service menu and go to the Engineering Menu tab. Click the Change Drinks button. Select the brand, product line and taste based on the drink number to which the concentrate is connected. Save the setting.
+  - Reopen the service menu and go to the Calibration Value screen. Select the assigned concentrate drink number and calibrate the product dispensation.
+  - Set up the drink dosage and prices. After completing the settings, make a test preparation of the drink.
 ----
@@ Line 170: / Line 183: @@
 ----
-==== Connecting ti iShaker telemetry ====
+==== Connecting to iShaker telemetry ====
 Telemetry is a service for monitoring and remote machine control. Read more in [[authorization_control_machine_ishaker_telemetry|Authorization and control of the machine in iShaker telemetry]].
@@ Line 183: / Line 196: @@
 ----
+===== Connecting the cup dispensing unit =====
+The S and Milkshaker models can be equipped with a cup dispensing mechanism. Assembly and configuration diagrams for the mechanism are available in [[connecting_cup_dispensing_unit|Connecting the cup dispensing module]] manual.
+----
 ===== Errors and solutions =====