Differences

This shows you the differences between two versions of the page.

--- ishaker_touch2 [2025/11/25 12:11] – [Connecting to WiFi networks:] ishakeradmin
+++ ishaker_touch2 [2025/12/04 08:09] (current) – [Protein vending machine] ishakeradmin
@@ Line 5: / Line 5: @@
 Everything you need to start, operate and maintain.
-{{ :t2-renderface.png?nolink&400|}}
+[[service_maintenance_t1|Service maintenance]]
+{{ :t2-name.jpg?nolink&200|}}
 ----
 ===== Electricity supply =====
@@ Line 70: / Line 71: @@
 The machine's water treatment system has two water supply configurations:
-{{:water-cran.png?nolink&100|}}[[подключение_центрального_водоснабжения_touch2|Connection to the central water supply system]] (external source).
+{{:water-cran.png?nolink&100|}}[[central_water_supply_system_touch2|Connection to the central water supply system (Touch 2)]] (external source).
-{{:water-bottle.png?nolink&100|}}[[подключение_к_баку_с_водой_touch2|Connection to a water tank  ]] (internal source).
+{{:water-bottle.png?nolink&100|}}[[water_tank_connection_touch2|Connecting to a water tank (Touch 2)]] (internal source).
 ----
@@ Line 155: / Line 156: @@
   * Go to the {{ :t-drinkdosages.png?linkonly |Dosages}} tab to change the dosage;
   * After setting the desired settings, click the “Save” button and close the menu.
+----
+===== Calibration of product dispensing =====
+Calibration is performed in two cases - before starting the machine into operation and when replacing the products used during operation. To perform the procedure, you will need a measuring cup and kitchen scales.
+Primary calibration includes:
+  * Checking the water dosage;
+  * Checking the powder dosage;
+  * Checking the dosage of syrups (if available).
+A re-check of the issuance is carried out in the event of a change in the products used (another brand, another product line).
+Calibration consists of dispensing the product, weighing and entering corrections on the machine display. Push {{ :ms-servicemode.jpg?linkonly |SERVICE MODE}},  in the "Configurator" tab, open the {{ :sm-_conversion_factor.png?linkonly |Conversion factor}} menu and follow the instructions on the screen.
 ----
@@ Line 169: / Line 187: @@
 ----
-===== Connecting and operating Shaker telemetry =====
-To set up and use telemetry, you need to register a user account and have a constant internet connection. For more information, see the article [[телеметрия|Authorization and Control of the Shaker Telemetry Machine]].
 ----
@@ Line 176: / Line 192: @@
 For remote connection to the machine, use [[https://anydesk.com/ru|the AnyDesk]]
+{{ :t2-anydesk.mp4 |}}
 ----
 ===== Errors and solutions =====
-[[ошибка_1_нет_воды_touch2|Error 1 No Water]]
+[[error_1_no_water_touch2|Error 1 No Water]]
-[[ошибка_5_нет_стакана_touch2|Error 5: No cup]]
+[[error_5_no_cup_usa|Error 5: No cup]]
 [[ошибка_9_манипулятора_touch2|Error 9 Manipulator Error (Touch 2)]]
@@ Line 201: / Line 218: @@
 **Question:** Drinks disappear from the screen. After a reboot, they appear, but then immediately disappear.
-**Answer:** Check {{ :t-remains1.jpg?linkonly |the product balance values}}  in the service menu. When the product balance reaches low levels (less than 5 servings), the machine removes the drink from the selection.
+**Answer:** Check {{ :t-powdersremaining.png?linkonly | remaining}}  in the service menu. When the product balance reaches low levels (less than 5 servings), the machine removes the drink from the selection.
 ----
 **Question:** The vending machine doesn't have the brand (flavor) I need in its settings. How do I add it?
-**Answer:** If the vending machine is connected to telemetry, click {{ :t-обновление_бд.jpg?linkonly |"Update database from server" }}, on the flavor setup screen , then check the list. If the desired product is not available, please submit a request to technical support. **Important!** Rendering media files (logos, flavor images) is a paid service. For details, please contact technical support.
+**Answer:** If the vending machine is connected to telemetry, click {{ :t-updatedatabasefromserver.png?linkonly |"Update database from server"}}, on the flavor setup screen , then check the list. If the desired product is not available, please submit a request to technical support. **Important!** Rendering media files (logos, flavor images) is a paid service. For details, please contact technical support.
 ----