Differences

This shows you the differences between two versions of the page.

--- ishaker_touch2 [2025/11/25 13:34] – [Water supply] ishakeradmin
+++ ishaker_touch2 [2025/12/04 08:09] (current) – [Protein vending machine] ishakeradmin
@@ Line 4: / Line 4: @@
 Everything you need to start, operate and maintain.
-{{ :t2-renderface.png?nolink&400|}}
 [[service_maintenance_t1|Service maintenance]]
+{{ :t2-name.jpg?nolink&200|}}
 ----
 ===== Electricity supply =====
@@ Line 74: / Line 73: @@
 {{:water-cran.png?nolink&100|}}[[central_water_supply_system_touch2|Connection to the central water supply system (Touch 2)]] (external source).
-{{:water-bottle.png?nolink&100|}}[[подключение_к_баку_с_водой_touch2|Connection to a water tank  ]] (internal source).
+{{:water-bottle.png?nolink&100|}}[[water_tank_connection_touch2|Connecting to a water tank (Touch 2)]] (internal source).
 ----
@@ Line 157: / Line 156: @@
   * Go to the {{ :t-drinkdosages.png?linkonly |Dosages}} tab to change the dosage;
   * After setting the desired settings, click the “Save” button and close the menu.
+----
+===== Calibration of product dispensing =====
+Calibration is performed in two cases - before starting the machine into operation and when replacing the products used during operation. To perform the procedure, you will need a measuring cup and kitchen scales.
+Primary calibration includes:
+  * Checking the water dosage;
+  * Checking the powder dosage;
+  * Checking the dosage of syrups (if available).
+A re-check of the issuance is carried out in the event of a change in the products used (another brand, another product line).
+Calibration consists of dispensing the product, weighing and entering corrections on the machine display. Push {{ :ms-servicemode.jpg?linkonly |SERVICE MODE}},  in the "Configurator" tab, open the {{ :sm-_conversion_factor.png?linkonly |Conversion factor}} menu and follow the instructions on the screen.
 ----
@@ Line 171: / Line 187: @@
 ----
-===== Connecting and operating Shaker telemetry =====
-To set up and use telemetry, you need to register a user account and have a constant internet connection. For more information, see the article [[телеметрия|Authorization and Control of the Shaker Telemetry Machine]].
 ----
@@ Line 183: / Line 197: @@
 ===== Errors and solutions =====
-[[ошибка_1_нет_воды_touch2|Error 1 No Water]]
+[[error_1_no_water_touch2|Error 1 No Water]]
-[[ошибка_5_нет_стакана_touch2|Error 5: No cup]]
+[[error_5_no_cup_usa|Error 5: No cup]]
 [[ошибка_9_манипулятора_touch2|Error 9 Manipulator Error (Touch 2)]]