Differences

This shows you the differences between two versions of the page.

--- ishaker_touch_1 [2025/11/05 13:55] – [Errors and solutions (Touch)] ishakeradmin
+++ ishaker_touch_1 [2025/12/11 15:53] (current) – ishakeradmin
@@ Line 3: / Line 3: @@
 ===== Protein vending machine =====
+[[service_maintenance_t1|Service maintenance]]
-{{ :touch-name.png?nolink&150|}}
+{{ :t1-logo.jpg?nolink&200|}}
@@ Line 124: / Line 125: @@
 ----
-===== Loading glasses =====
+===== Loading cups =====
 Requirements for cups: diameter no more than 90 mm, height no more than 110 mm, volume up to 400 ml, material - paper (cardboard).
@@ Line 158: / Line 159: @@
 ----
+===== Calibration of product dispensing =====
+Calibration is performed in two cases - before starting the machine into operation and when replacing the products used during operation. To perform the procedure, you will need a measuring cup and kitchen scales.
+Primary calibration includes:
+  * Checking the water dosage;
+  * Checking the powder dosage;
+  * Checking the dosage of syrups (if available).
+A re-check of the issuance is carried out in the event of a change in the products used (another brand, another product line).
+Calibration consists of dispensing the product, weighing and entering corrections on the machine display. Push {{ :ms-servicemode.jpg?linkonly |SERVICE MODE}},  in the "Configurator" tab, open the {{ :sm-_conversion_factor.png?linkonly |Conversion factor}} menu and follow the instructions on the screen.
+----
 ===== Internet connection =====
 An internet connection is required for telemetry and remote connection to the machine. Connection types are available:
@@ Line 167: / Line 186: @@
 {{ :t-wificonnecting.mp4 |}}
 ----
+===== Connecting to iShaker telemetry =====
+Telemetry is a service for monitoring and remote machine control. Read more in [[authorization_control_machine_ishaker_telemetry|Authorization and control of the machine in iShaker telemetry]].
+----
@@ Line 202: / Line 229: @@
 **Question:** The machine shows error 1 No water, water has just been refilled.
-**Answer: ** After refilling or replacing the water tank, you need to bleed the system to remove air. Use the mixer wash with {{:t-mixerwashing.jpg?linkonly|1-4 buttons}} in the service menu. Press {{ :t-controller_reboot.jpg?linkonly |CONTROLLER REBOOT}}. After servicing the machine, we recommend performing a test brew to ensure stable operation. A more detailed description of the error is available here [[error_1_no_water_touch_usa|Error 1 No Water]].
+**Answer: ** After refilling or replacing the water tank, you need to bleed the system to remove air. Use the mixer wash with 1-4 buttons in the service menu. Press {{ :t-controller_reboot.jpg?linkonly |CONTROLLER REBOOT}}. After servicing the machine, we recommend performing a test brew to ensure stable operation. A more detailed description of the error is available here [[error_1_no_water_touch_usa|Error 1 No Water]].
 ----