Differences

This shows you the differences between two versions of the page.

--- ishaker_touch_1 [2025/11/07 08:43] – [Protein vending machine] ishakeradmin
+++ ishaker_touch_1 [2025/12/11 15:53] (current) – ishakeradmin
@@ Line 3: / Line 3: @@
 ===== Protein vending machine =====
+[[service_maintenance_t1|Service maintenance]]
 {{ :t1-logo.jpg?nolink&200|}}
@@ Line 124: / Line 125: @@
 ----
-===== Loading glasses =====
+===== Loading cups =====
 Requirements for cups: diameter no more than 90 mm, height no more than 110 mm, volume up to 400 ml, material - paper (cardboard).
@@ Line 158: / Line 159: @@
 ----
+===== Calibration of product dispensing =====
+Calibration is performed in two cases - before starting the machine into operation and when replacing the products used during operation. To perform the procedure, you will need a measuring cup and kitchen scales.
+Primary calibration includes:
+  * Checking the water dosage;
+  * Checking the powder dosage;
+  * Checking the dosage of syrups (if available).
+A re-check of the issuance is carried out in the event of a change in the products used (another brand, another product line).
+Calibration consists of dispensing the product, weighing and entering corrections on the machine display. Push {{ :ms-servicemode.jpg?linkonly |SERVICE MODE}},  in the "Configurator" tab, open the {{ :sm-_conversion_factor.png?linkonly |Conversion factor}} menu and follow the instructions on the screen.
+----
 ===== Internet connection =====
 An internet connection is required for telemetry and remote connection to the machine. Connection types are available:
@@ Line 167: / Line 186: @@
 {{ :t-wificonnecting.mp4 |}}
 ----
+===== Connecting to iShaker telemetry =====
+Telemetry is a service for monitoring and remote machine control. Read more in [[authorization_control_machine_ishaker_telemetry|Authorization and control of the machine in iShaker telemetry]].
+----