Differences

This shows you the differences between two versions of the page.

--- service_maintenance_t1 [2025/11/07 14:36] – [Setting up the cup dispensing unit] ishakeradmin
+++ service_maintenance_t1 [2025/11/07 14:37] (current) – [Setting up the cup sensor] ishakeradmin
@@ Line 142: / Line 142: @@
 ===== Setting up the cup sensor =====
-Cup sensor calibration must be performed directly at the vending machine installation site by trained personnel. Sensor sensitivity depends on ambient temperature, so any adjustments to the sensor must be performed under stable temperature conditions (a critical requirement during colder seasons).
+Sensor sensitivity depends on ambient temperature, so any adjustments to the sensor must be performed under stable temperature conditions (a critical requirement during colder seasons).
 **ATTENTION! Due to the specific operation of the cup sensor, it is not recommended to use red or black cups.**