IShaker Wiki

User Tools

Site Tools

Trace: • error_5_no_cup_usa
water_tank_connection_touch2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
water_tank_connection_touch2 [2025/11/25 13:47] – [Connecting to a water tank (Touch 2)] ishakeradminwater_tank_connection_touch2 [2025/11/25 13:48] (current) – [Pump setup] ishakeradmin
Line 27: Line 27:
 The default value is 40%. Moving the slider to the left will decrease the pressure, while moving it to the right will increase it. To save the change, be sure to click the "Save" button. **It is not recommended to increase or decrease the pressure drastically; change the value by 10% at a time, be sure to save the change, reboot the machine, and check for error 1**. The default value is 40%. Moving the slider to the left will decrease the pressure, while moving it to the right will increase it. To save the change, be sure to click the "Save" button. **It is not recommended to increase or decrease the pressure drastically; change the value by 10% at a time, be sure to save the change, reboot the machine, and check for error 1**.
  
-**After changing the PWM setting, {{ :t2-watercalibration.png?linkonly |water calibration}} is required to correctly calculate drink dosages.**+**After changing the PWM setting, {{ :t-conversionfactorscreen.png?linkonly |water calibration}} is required to correctly calculate drink dosages.**
  
  
  
  
water_tank_connection_touch2.1764067646.txt.gz · Last modified: 2025/11/25 13:47 by ishakeradmin